MEP Engineering & Specialized Services
Fulfillment is qualification, learning and commitment combined.
Sted, Our Services
Testing & Commissioning Management
Referring to the diversity in the project needs, the commissioning process takes a critical path to assure that all systems and components of a building are designed, installed, tested, operated, and maintained according to the operational requirements of the owner or final client.
In practice, the commissioning process comprises the integrated application of a set of engineering techniques and procedures to check, inspect and test every operational requirement of the project, from individual functions, such as instruments and equipment, up to complex amalgamations of modules, subsystems and systems.
Commissioning activities, in the broader sense, are applicable to all phases of the project, from the basic and detailed design, procurement, construction and assembly, until the final handover of the unit to the owner, including in certain projects an assisted operational phase as well.
Construction Management
STED Co Ltd. follows a strict work flow in execution, products’ delivery and providing services per project schedule and specs with ensured customer satisfaction.
MEP Works
Construction
Implementation
Engineering Design & Project Management
Operation Maintenance & Technical Support
Design by specialized engineers
Experienced managers and engineers
Structured implementation
Resources mobilization
Supervised Execution
Controlled quality
On-time delivery
Skilled operators.
Maintenance services
Technical trainings
Hands-On support
Project cataloging
Specialized Hands-on Tests
Testing categories fall into the below:
1. TAB
2. Room Integrity Test
3. Mechanical Startup Test
4. Sound level measurement test
List of conducted tests:
a. Static Tests
Minimum Electrical/ELV Static Tests
Minimum Mechanical Static tests
b. Pre-Commissioning / Pre-Functional Test (PFT)
c. Startup / Energization
d. TAB Works
Functional Testing of HVAC equipment as per HVAC BOQ
Adjusting and Balancing the Air and Water systems as per HVAC BOQ
e. Functional Performance Test
f. Test Report
Building Performance Evaluation
If you are looking to acquire a new property or improve the performance of your current building STED offers your vacant or occupied premises a specialized building performance evaluation service, designed to optimize and amplify the individual and collective system output.
Energy being today’s global concern and a weight on your bill, requires a meticulous observation to reduce consumption while increasing performance. Covering all types of buildings, from residential, commercial, mixed-use, industrial or any purpose building; building performance evaluation includes a fulfilled assessment state of the building encompassing installations, split & connected functions, automation, energy & power records, leaks and all other crucial and complementary aspects.
Some types of fulfillment support services include:
MEP System Performance
ECE Energy Consumption Evaluation
Retro-Commissioning
Functionality Status Report
QA/QC Management & Inspection
Combines Quality Assurance, the process or set of processes used to measure and assure the quality of a product, and Quality Control, the process of meeting products and services to consumer expectations.
At STED our goal is to ensure both QA and QC are monitored and controlled to observe project execution and identify potential problems in a timely manner and enable prompt corrective actions.
Building owners and operators hire STED’s team for a fulfilled and optimal control on their projects, so they measure ongoing project activities, derive realtime reporting, monitor project variables (cost, scope, tasks), identify and mitigate risks and keep projects efficiently on track.
Our 360o approach allows us to evaluate all the aspects of a project, advise on best equipment selection, avoid installation errors, attain compliance with local and international standards, collectively leading to delivering the highest quality outcomes with consistent support from every member of our specialized team.
Handover Management
The handover process represents the most crucial step with the liability it beholds. STED’s collective experience in the full process from developing initial OPR, design, design review, to execution, testing & commissioning until handover; together assures the highest quality of handover management.
During the process of handover, STED offers an all-round support with full documentation including but not limited to:
Operation Manuals
Register Assets
Training Manual
Hands-on training to owner/operator
System integration testing
Execution documents’ review
And other project specific documentation
This makes a perfect transition to your operating team and ensures documentation become your guidance as you take over.
Facility Management Support
STED’s internationally certified engineers leave no requirement unserved; and while being involved in all aspects of project handling, we have tailored a state-of-the-art range of facility management support services to ensure you’re running a seamless operation for your premises.
Within the multi-dimensional and multi-layered systems being installed, FM becomes a complex mission. With systems like HVAC, plumbing, electricity, access control, fire and emergency alerting, you require a specialized team to support and guide you throughout the process of establishing your FM operations.
We possess the ability to conduct a full induction to your operating team. This involves system knowledge, operability training, task delegation, timelines, risk management and coordination; which will totally simplify the FM operations and ensure you a fully functional premises.
Let's get in touch, please fill this quick form!
"*" indicates required fields
Growth Partners
NEBB, ASHRAE, BSRIA, CSA, NFPA and ISO are our partners to achieve and maintain high performance by training, certification and the latest standards and procedures.
Menu
Saudi Arabia
STED SAUDI Co. L.T.D.
Riyadh, KSA, CR: 1010618041
6321 Al Ulaya – Al Sahafa Dist. Riyadh 13321 – 3159, Sahafa Offices Building, 4th Floor
T: +966112543739
[email protected]
Riyadh, KSA, CR: 1010618041
6321 Al Ulaya – Al Sahafa Dist. Riyadh 13321 – 3159, Sahafa Offices Building, 4th Floor
T: +966112543739
[email protected]
Lebanon
STED Co. L.T.D.
Baabda, Lebanon, CR: 2040339
Branch Office: Sin El Fil, Youssef El Hayek Road, Houjeyli Center, 6th Floor
T: +9613516476
[email protected]
Copyrights STED LTD. 2022